+39 348 8683311
info@ad-maiora.eu
Italiano
Polski
Español
.svg)
.svg)
.svg)
.svg)
External fixator radiolucent circular and hybrid kit suitable for patients up from 25kg in weight
Contenitore per impianti e strumenti per TTA porosa.
For dorsal positioning of the patient during surgical procedures.
Lexan top for surgical table is radiolucent and can be removed from the base
Porous titanium cylinder to support areas with bone loss.
Negative-threaded K-wires offer a stronger anchor due to their ability to screw in securely.
Drill bit for pins or screws engineered to provide unmatched precision and reliability during surgical procedures.
Container for rail external fixator kit
Mini linear radiolucent fixator kit is indicated for the treatment of patients up to 5 kg
Il distrattore mini AM è utile in tutte quelle circostanze in cui ci siano le indicazioni per eseguire una distrazione micrometrica progressiva. La facilità di applicazione, la semplicità di utilizzo anche da parte del proprietario e il peso e dimensioni ridotte lo rendono particolarmente indicato per i pazienti di piccola taglia. In situazioni specifiche, può anche essere utilizzata la sua funzione complementare, cioè la compressione progressiva.
Contenitore autoclavabile OstiLok per placche, viti e strumenti.
The dynamometric screwdriver is designed to apply a repeatable torque to the locking screws.
The wedge 6.3 for X-Porous TTA represents a major development for the implants of the procedure.
Orthopedic screw used to stabilize the plate to the tibia and to the tibial crest
Orthopedic screw used to stabilize the plate to the tibia and to the tibial crest
For osteotomy cut radius of 18mm or more and patients weighing up to 15 kg
For osteotomy cut radius 18 mm or more and patients weighing up to 15 kg.
The table has up-down and trendelemburg movements with single pedalboard.
Table with a pair of front stabilizers that increase stability.
Stainless steel top for surgical table can be removed from the base.
For dorsal positioning of the patient during surgical procedures.
Anodized blue universal clamp for easy coupling of all accessories to the surgical table
It is used with belts or chains for sensitive positions.
The traction belt is used for performing skeletal traction on distal limb segments, i.e. radius-ulna and tibia.
Hook for anchorage and tensioning of the patient retention bands.
The traction stirrup is used for performing skeletal traction on the proximal limb segments, i.e. humerus and femur.
Dynamometer to measure the force applied during skeletal traction.
Dorsal positioner for a stable dorsal recumbency of cats and dogs
Two side positioners stabilize those patients who tend not to be stable in the desired surgical position.
Armrest for microsurgical procedures designed to give stable support to the surgeon’s arm
Bar that holds up the surgical draping on the anaesthetist’s side
The rod allows to support the bottle for infusion of the patient reducing the overall encumbrance
Traction bar allows traction by means of a mechanism of micrometric elongation, in a linear and progressive fashion.
Rod to prevent the decline of the plan when you push on the free end
Extension makes it possible to extend the travel distance of many accessories
Tiltable fluid collection pan for fluid drainage
Tray to allow all instruments to be within easy reach in the surgical theatre
Accessory rack useful to store all the accessories of the table appropriately
K wire with a peculiar tip design, which allows an easy insertion in hard cortical bone.
K wires with Trocar tips, suited for cancellous bone.
The Screwpin threaded pins are an evolution of the standard pins for external fixation
Threaded rod that allows the connection and reciprocal movement of the circular components.
Threaded rod that allows the connection and reciprocal movement of the circular components.
Rail for stabilization of bone-holding components
Rail for stabilization of bone-holding components with holes that are coplanar with the rail
Fixator capables of stabilizing the torsion forces.
Hemispherical nuts which lock the inclinable rails and the inclinable cylindrical rods in oblique position compared to the ring or half-ring.
Round washer with 6.5 mm hole in stainless steel.
Round washer with 6.5 mm hole in stainless steel.
Toothed washer for the stabilization of the nails
The rectangular washer is interposed between the wire/pin and the ring plane so as to protect the ring surface.
Self-centering Washers for Veterinary Orthopedic Surgery
Hemispherical washer that locks the rails and the cylindrical rods in oblique position compared to the ring or half-ring
Radiotransparent Hemispherical Washer 10x15 mm for Veterinary Orthopedic Surgery
Sterilisation case for the components of mini linear radiolucent kit.
Sterilisation case for the components of dynamizable set.
Complete autoclavable container for mini hybrid kit
Complete autoclavable container for maxi hybrid kit
Sterilisation case for the components of midi kit.
Malleable stainless steel rods suitable for obtaining a “sail-shaped” assembly
This plate is designed to resist the weight bearing loads of less than 10 kg patients
This plate is designed to resist the weight bearing loads of a 10 kg to 20 kg patient
The spacer allows to tension the wire K applied it to the head of the thread tension.
This locking plate is designed to resist the weight bearing loads of a 20 kg to 40 kg patient
Clamp extension for dynamizable which allows greater flexibility in pin connection to distance the pin plane from the fixator plane
This plate is reversible eliminating the need of Left/Right plates. This locking plate is designed to resist the weight bearing loads of less than 10 kg patients.
Dynamizable linear fixator able to moving longitudinally so as to allow compression and distraction of the fracture stumps.
This plate is designed to withstand the load bearing loads of a 10kg to 20kg patient. The plate is reversible eliminating the need for left/right plates.
The titanium large cross plate CPL-100 (CPL-100) is designed to resist the weight bearing loads of a 20 kg to 40 kg patient.
This locking plate (PSHS-100) is designed to resist the weight bearing loads of less than 15 kg patients.
Stabilizing hook used to lock the malleable bar at its ends, connecting it to the linear and circular elements
This locking plate (PMHS-100) is designed to resist the weight bearing loads of a 10 kg to a 30 kg patient.
This locking plate (PLHS-100) is designed to resist the weight bearing loads of a 20 kg to a 40 kg
Hook that can lock nails up to 2.5 mm in diameter
Hook for stabilize the connection bars checking the torque forces.
Universal cardan joint that allows the connection of two levels of fixation to obtain programmed angular movements of the fixator. It is particularly useful to correct angular deformities.
Joint makes it possible to obtain transarticular constructs and the connection between two linear elements or between a linear and a circular element.
Dual function component for external fixation
Function 1: Post
Function 2: Wire or pin holding clamp
This titanium alloy screw family is compatible with the OsTi-Lok System.
This titanium alloy screw family is compatible with the OsTi-Lok System.
This titanium alloy screw family is compatible with the OsTi-Lok System.
This titanium alloy screw family is compatible with the OsTi-Lok System.
Drill bit with quick coupling for Ostilok screw
The In-plane bender is used with any of the Grip-Nut sizes to bend any of the Plates in its sagittal plane
This connector makes it possible to connect dynamizable linear fixators of the uni11 series with all circular elements.
Wire/pin clamp in aluminium alloy compatible with circular components and rails
Aluminum alloy clamp for linear dynamizable fixators and for the tiltable bars
Radiolucent support that forms the clamp polilock together with some hooks.
Cap useful to avoid injury to the patient and to the operator.
The T10 Driver Bit is a quick-connect (AO) compatible.
Autoclavable OstiLok Case for plates, screw and instruments.
This locking plate is designed to resist the weight bearing loads of less than 3 kg patients. Specially designed for Diaphyseal (mid section) fractures.
The straight plate, thickness 1.5 is designed to resist patients up to 3 kg.
The titanium alloy cross-locked plate is designed to withstand patients weighing up to 3 kg.
The straight plate, thickness 2.0 is designed to withstand patient loads up to 5 kg
Threaded locker for pin for veterinary external fixation
This titanium alloy locking plate is designed to resist the weight bearing loads for up to 5 kg patients.
This locking plate is designed to resist the weight bearing loads of less than 5 kg patients. Specially designed for Diaphyseal (mid section) fractures.
This locking plate is designed to resist the weight bearing loads for up to 5 kg patients.
Stainless steel screw M3 to connect among them the two carbon rods using the round supports.
Perforated screw allows to lock the tensioned K wires to rings.
Dynamometric wire tensioner for the measurement of the tension to which the K-wires are subjected.
Wrench for hooks used to lock the hook of any type to prevent it from rotating
Titanium screws with diameters of 1.5 mm and 2.0 mm
Socket wrench for tighten the M3 nuts of the radiolucent mini linear fixator Polilock.
Titanium screws with diameters of 1.5 mm and 2.0 mm.
Micrometric distractor allows the advancement of the tibial crest in a very gradual way
Power distractor allows a smooth and linear advancement because the branches are much stiffer.
Mini screwdriver for square head screws set Osti-Lok mini
Tip for quick coupling handle for hexagonal screws for the X-Porous TTA® system
Screwdriver handle with quick coupling for hexagonal head screws.
Sleeve can center exactly the predrilling for the locked screw in the locking hole of the plate.
Flezible Radiographic reference with spherical head
Extractor hook for the extraction of the wedges from the extended container for X-Porous TTA implants.
The impactor will allow to overwhelm the friction with the bone, making the insertion of the wedge
For osteotomy cut radius 22 mm or more and patients weighing up to 30 kg.
For osteotomy cut radius 22 mm or more and patients weighing up to 30 kg.
For osteotomy cut radius 27mm or more for patients weighing up to 60 kg.
For osteotomy cut radius 27 mm or more and patients weighing up to 60 kg.
Orthopedic screw used to stabilize the plate to the tibia and to the tibial crest
Titanium locking screw hexagonal head for stabilize the locking plates
Series 4 plates are used for small dogs
Series 7 plates are used for medium-large dogs
Series 8 plates are used for large-giant dogs
The locking plates of the X-Porous TTA system can be divided into right and left.
The locking plates of the X-Porous TTA system can be divided into right and left.
Screwdriver with interchangeable tip for cross head screws
Set of external dynamizable fixation contains everything you need for the application of the method in patients weighing more than 10 kg
Rail fixator Kit suitable for patients that weigh from 10 to 40 kg
External circular and hybrid fixator suitable for patients up to 1 form 10 kg in weight
Hook that can lock nails up to 2.5 mm in diameter
External fixator radiolucent circular and hybrid kit suitable for patients up from 10 to 40 kg in weight
External circular and hybrid fixator suitable for patients until 10 kg in weight
External circular and hybrid fixator suitable for patients up from 10 to 40 kg in weight
Maxi hybrid aluminum fixator kit suitable for patients weighing more than 25 kg
Screwdriver for locked hexagonal screws Ø 2,00 mm
M6 nut used for Wire/pin clamp and Double-purchase post
Dado M6 alluminio utilizzato per fissare il morsetto fissafilo e bandierina commerciale.
This locking plate (PS16-100) is designed to resist the weight bearing loads of less than 10 kg
This locking plate (PM16-100) is designed to resist the weight bearing loads of a 20 kg to 40 kg patient
This locking plate (PM16-100) is designed to resist the weight bearing loads of a 20 kg to 40 kg patient.
Prodotti
Nuovi prodotti
Las placas bloqueadas representan una técnica de osteosíntesis que ha tenido una notable difusión por sus ventajas biomecánicas. Sin embargo, para obtener resultados óptimos, es fundamental comprender bien sus aspectos técnicos.
En este webinar se analizará detalladamente la metodología de aplicación y, a continuación, la técnica MIPO (Osteosíntesis con Placa Mínimamente Invasiva), una opción menos agresiva para los tejidos, pero que exige una comprensión precisa de sus fases quirúrgicas.
El objetivo del webinar es brindar a los participantes competencias prácticas y recomendaciones para un uso eficaz y mínimamente invasivo.
-
📅 7 de mayo de 2025 – 21:00 CET
💻 Online
¡Todo sobre la ruptura del cruzado!
Por primera vez en España, junto con Evolig, presentamos un curso completo con tres técnicas innovadoras: Evolig, X-Porous TTA y X-TPLO.
Con instructores de alto nivel y expertos en los productos para el mejor aprendizaje Gian Luca Rovesti, Alexander Ureta, José María Carrillo y Emilio Salas.
🗓️ 27 de junio: sesión abierta con mesa redonda + mini talleres
🗓️ 28 de junio: sesiones prácticas
🔹 Curso práctico X-Porous TTA – inscripción y detalles
🔹 Curso práctico X-TPLO – inscripción y detalles
🔹 Curso práctico Evolig
📍 En IMPROVE Veterinary Education (Madrid)
ℹ️ info@ad-maiora.eu / +39 348 8683311
ℹ️ info@evolig.com / 600 06 88 36
