Home

External fixator radiolucent circular and hybrid kit suitable for patients up from 25kg in weight

Contenitore per impianti e strumenti per TTA porosa.

For dorsal positioning of the patient during surgical procedures.

Lexan top for surgical table is radiolucent and can be removed from the base

Porous titanium cylinder to support areas with bone loss.

Negative-threaded K-wires offer a stronger anchor due to their ability to screw in securely.

Drill bit for pins or screws engineered to provide unmatched precision and reliability during surgical procedures.

Container for rail external fixator kit

Radiotransparent carbon ring for external fixation

Mini linear radiolucent fixator kit is indicated for the treatment of patients up to 5 kg

Il distrattore mini AM è utile in tutte quelle circostanze in cui ci siano le indicazioni per eseguire una distrazione micrometrica progressiva. La facilità di applicazione, la semplicità di utilizzo anche da parte del proprietario e il peso e dimensioni ridotte lo rendono particolarmente indicato per i pazienti di piccola taglia. In situazioni specifiche, può anche essere utilizzata la sua funzione complementare, cioè la compressione progressiva.

Bender direct connection

Contenitore autoclavabile OstiLok per placche, viti e strumenti.

The dynamometric screwdriver is designed to apply a repeatable torque to the locking screws.

The wedge 6.3 for X-Porous TTA represents a major development for the implants of the procedure.

Orthopedic screw used to stabilize the plate to the tibia and to the tibial crest

Orthopedic screw used to stabilize the plate to the tibia and to the tibial crest

For osteotomy cut radius of 18mm or more and patients weighing up to 15 kg

For osteotomy cut radius 18 mm or more and patients weighing up to 15 kg.

The table has up-down and trendelemburg movements with single pedalboard.

Table with a pair of front stabilizers that increase stability.

Stainless steel top for surgical table can be removed from the base.

For dorsal positioning of the patient during surgical procedures.

Table extension to increase the table top surface

Anodized blue universal clamp for easy coupling of all accessories to the surgical table

Patient retention band during traction

It is used with belts or chains for sensitive positions.

The traction belt is used for performing skeletal traction on distal limb segments, i.e. radius-ulna and tibia. 

Hook for anchorage and tensioning of the patient retention bands.

The traction stirrup is used for performing skeletal traction on the proximal limb segments, i.e. humerus and femur.

Dynamometer to measure the force applied during skeletal traction.

Dorsal positioner for a stable dorsal recumbency of cats and dogs

Two side positioners stabilize those patients who tend not to be stable in the desired surgical position.

Armrest for microsurgical procedures designed to give stable support to the surgeon’s arm

Bar that holds up the surgical draping on the anaesthetist’s side

The rod allows to support the bottle for infusion of the patient reducing the overall encumbrance

Traction bar allows traction by means of a mechanism of micrometric elongation, in a linear and progressive fashion.

Rod to prevent the decline of the plan when you push on the free end

Extension makes it possible to extend the travel distance of many accessories

Tiltable fluid collection pan for fluid drainage

X-ray cassette tray for intraoperative radiography

Tray to allow all instruments to be within easy reach in the surgical theatre

Accessory rack useful to store all the accessories of the table appropriately

K wire with a peculiar tip design, which allows an easy insertion in hard cortical bone.

K wires with Trocar tips, suited for cancellous bone.

The Screwpin threaded pins are an evolution of the standard pins for external fixation

Aluminium ring for external fixation

Threaded rod that allows the connection and reciprocal movement of the circular components.

Threaded rod that allows the connection and reciprocal movement of the circular components.

Rail for stabilization of bone-holding components

Rail for stabilization of bone-holding components with holes that are coplanar with the rail

Fixator capables of stabilizing the torsion forces.

Carbon bars that connect with all radiolucent round clamps

Hemispherical nuts which lock the inclinable rails and the inclinable cylindrical rods in oblique position compared to the ring or half-ring.

M5 nut with flange.

M5 hemispherical nut, Inox

M5 hemispherical nut, Titanium

Inclinable rod for stabilizing bone-holding components

Round washer with 6.5 mm hole in stainless steel.

Round washer with 6.5 mm hole in stainless steel.

Toothed washer for the stabilization of the nails

The rectangular washer is interposed between the wire/pin and the ring plane so as to protect the ring surface.

Self-centering Washers for Veterinary Orthopedic Surgery

Hemispherical washer that locks the rails and the cylindrical rods in oblique position compared to the ring or half-ring

 Radiotransparent Hemispherical Washer 10x15 mm for Veterinary Orthopedic Surgery

Sterilisation case for the components of mini linear radiolucent kit.

Sterilisation case for the components of dynamizable set.

Complete autoclavable container for mini hybrid kit

Complete autoclavable container for maxi hybrid kit

Sterilisation case for the components of midi kit.

Malleable stainless steel rods suitable for obtaining a “sail-shaped” assembly

Cylinder for supporting threaded pins

This plate is designed to resist the weight bearing loads of less than 10 kg patients

This plate is designed to resist the weight bearing loads of a 10 kg to 20 kg patient

The spacer allows to tension the wire K applied it to the head of the thread tension.

This locking plate is designed to resist the weight bearing loads of a 20 kg to 40 kg patient

Clamp extension for dynamizable which allows greater flexibility in pin connection to distance the pin plane from the fixator plane

This plate is reversible eliminating the need of Left/Right plates. This locking plate is designed to resist the weight bearing loads of less than 10 kg patients.

Dynamizable linear fixator able to moving longitudinally so as to allow compression and distraction of the fracture stumps.

This plate is designed to withstand the load bearing loads of a 10kg to 20kg patient. The plate is reversible eliminating the need for left/right plates.

The titanium large cross plate CPL-100 (CPL-100) is designed to resist the weight bearing loads of a 20 kg to 40 kg patient.

This locking plate (PSHS-100) is designed to resist the weight bearing loads of less than 15 kg patients.

Stabilizing hook used to lock the malleable bar at its ends, connecting it to the linear and circular elements

This locking plate (PMHS-100) is designed to resist the weight bearing loads of a 10 kg to a 30 kg patient.

This locking plate (PLHS-100) is designed to resist the weight bearing loads of a 20 kg to a 40 kg

Hook that can lock nails up to 2.5 mm in diameter

Hook for stabilize the connection bars checking the torque forces.

Universal cardan joint that allows the connection of two levels of fixation to obtain programmed angular movements of the fixator. It is particularly useful to correct angular deformities.

Joint makes it possible to obtain transarticular constructs and the connection between two linear elements or between a linear and a circular element.

Dual function component for external fixation

Function 1: Post

Function 2: Wire or pin holding clamp

This titanium alloy screw family is compatible with the OsTi-Lok System.

This titanium alloy screw family is compatible with the OsTi-Lok System.

This titanium alloy screw family is compatible with the OsTi-Lok System.

This titanium alloy screw family is compatible with the OsTi-Lok System.

Drill bit with quick coupling for Ostilok screw